Close-up of construction facade sealant application

Применение

Construction & Automotive MS Sealants

For construction facade and automotive MS sealants, focusing on long-term non-yellowing performance, compatibility and bond durability.

Применение

Construction & Automotive MS Sealants

The appearance stability of a sealant depends on how well the plasticizer resists oxidation under ultraviolet and heat, and on its compatibility with the polymer, fillers and adhesion promoters. DB77 is designed for MS sealant systems with good resin compatibility and a long-term non-yellowing direction, which suits construction and automotive sealing where weathering and appearance matter.

Key performance requirements

ItemDirection and notes
Non-yellowingSmall colour shift after accelerated and outdoor exposure
CompatibilityCompatible with the polymer, calcium carbonate fillers and promoters
Bond durabilityRetains elongation and bond strength after ageing
AppearanceAutomotive interior directions target low fogging and odour

Dosage and processing direction

The addition level follows the compatibility of the sealant system and filler; evaluate with the measured colour difference after accelerated weathering.

Control mixing temperature and vacuum deaeration time so that the production heat history does not affect appearance stability.

Frequently asked questions

Can non-yellowing performance be guaranteed?

No. DB77 is designed with a long-term non-yellowing direction; the result depends on the full formulation and exposure conditions and is assessed by weathering tests with colour measurement.

Do construction and automotive sealants need different grades?

The same grade can serve both, but the evaluation focus differs: construction emphasises weathering and appearance, while automotive also requires low fogging, low odour and non-staining behaviour.

Применение

Получить бесплатный образец 1 кг

Бесплатный образец 1 кг для тестов отправляется по всему миру через DHL / FedEx.

После отправки инженер по продажам подтвердит марку, количество образца и доставку.

Определено по браузеру, при необходимости измените.

Отправляя форму, вы соглашаетесь на использование данных только для этого запроса.

Не знаете, какую марку выбрать? Поможем

Опишите применение и требования — предложим подходящую серию и характеристики.

Применение

Условия по образцам

Получить бесплатный образец 1 кг

Бесплатный образец 1 кг для тестов отправляется по всему миру через DHL / FedEx.

  • Образец 1 кг для проверки совместимости в вашей рецептуре
  • Вместе с образцом предоставляем TDS и данные испытаний COA
  • Ответ по почте или телефону в течение 24 часов в рабочие дни
alice@dobonewenergy.com